Adastra US90 Slave Amplifier
Adastra
443-199
5015972216590
    Delivery time:2 - 3 Working Days
Add to cart
  • Description
  • More
  • Specifications

US90 Compact 60 Watt Slave Amplifier.

100V line or 8 Ohms operation.
Balanced Input (Screw Terminals) and 2 x L+R RCA Sockets.
100V input for connection in parallel with existing 100V speakers.
Channel Gain Control.
LED Signal Indication.
24V fire alarm mute contacts.
Supplied with hardware for rack-mounting 2 units
2 x L+R RCA Slave Output.

US60 100V slave amplifier built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.
100V slave amplifier built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.
Power Supply: 170-264Vac, 50Hz (IEC)
Power:

90 Watts
Line input:

2 x RCA
Line Sensitivity:

-10dB
Signal to Noise Ratio (SNR):

80dB
Total Harmonic Distortion (THD): <0.4%
Dimensions: 330 x 210 x 44mm