W Audio EPX 1200 Amplifier
W Audio
440-023
0723175524439
    Delivery time:2 - 3 Working Days
Add to cart
  • Description
  • Specifications

2 x 400 watts RMS @ 8 Ohms

Selectable Input sensitivity: 0.775V / 1.0V / 1.44V

Suitable for 4 and 8 Ohm Loads

Operation. Stereo, Parallel or Bridge Mode.

2 x RCA/Jack Inputs.

Independent Channel Gain Controls.

LED Signal Indication.

Speakon/ Binding Post Speaker terminals

The EPX 1200 is a professional stereo amplifier idea for installations into bars, clubs and pubs, and where reliability and high power output is required. The EPX 1200 can be installed into a rack taking up a 2U space  or it can be used free standing on a table or shelf.

The EPX 1200 will deliver 600 watts RMS per channel at 4 Ohm load or 400 watts in to a 8 Ohms. It boasts a range of key features such as short circuit and thermal overload protection, soft start, limit, DC fault.

The W Audio EPX 1200 amplifier is more than just a PA amp, it can be used as a stand alone unit or integrated into a large PA system. It will accept XLR and Jack input signals and has speakon and binding posts for speaker outputs

Power Supply: 230Vac, 50Hz (Powercon)
Output Power (RMS):

2 x 800W @ 4 ohms

2 x 600W @  ohms

1 x 1200W @ 8 ohms (Bridged)

1 x 2900W @ 4 ohms (Bridged)
Line input:

XLR/6.35mm Jack Sockets
Input Sensitivity: Switchable between 0.7V - 1.0V and 1.44V
Line Output:

2 x XLR (Link)
Frequency Response: 20Hz - 20kHz
Signal to Noise Ratio (SNR):

>100dB
Total Harmonic Distortion (THD): %
Dimensions:

481 x 450 x 87mm
Related Products

XLR Screened Leads
DAP XLR Screened leads, Plug to Socket, available in seven different lengths.
More details

Neutrik NL2FX SpeakON Plug
Neutrik 2-Pole Speaker Plug
More details