DAP CA-2300 Amplifier

DAP
446-513
8717748421425
    Delivery time:2 - 3 Working Days
Add to cart
  • Description
  • More
  • Specifications

2 x 180 Watt @ 8 ohms

Suitable for 2, 4 and 8 Ohm Operation.

Built in Limiter

Stereo or Bridge Mode.

2 x Balanced XLR Inputs.

Independent Channel Gain Controls.

LED Signal Indication.

The DAP CA-2300 is a 2 x 180 watt amplifier for a compact 19-inch installation with a 1 unit height. Equipped with Class D technology and SMPS, the CA-2300 has all the necessary functionalities for today's user.

This 2-channel model has XLR and Jack inputs. Available outputs are speakON and 6.3 mm Jack with the option to switch between stereo and bridge mode. In addition, the gain is adjustable per channel.

CA-23000 has a built in limiter which can be switched in or out depending on your sysems configuration.

The DAP CA-2300 Amplifier can be wired as 2-channel stereo unit with two compatible speakers. The amplifier can deliver 180 watts per channel into a 8 ohm load. So each speaker cabinet should be rated between 70 and 115 Watts at 8 ohms.

DAP CA-2300 Amplifier

This set up would be suitable for waiting room or reception area.

The DAP CA-2300 Amplifier can be wired as 2-channel stereo unit with four identical speakers. The amplifier can deliver 300 watts per channel into a 4 ohm load. So each speaker cabinet should be rated between 60 and 95 Watts at 8 ohms.

DAP CA-2300 Amplifier

You could use a system like this in a hotel foyer or reception area.

The DAP CA-2300 Amplifier can be wired as 2-channel stereo unit with eight speakers. The amplifier can deliver 525 watts per channel into a 2 ohm load. So each speaker cabinet should be rated between 50 and 80 Watts at 8 ohms.

DAP CA-2300 Amplifier

Ideal system for dinning room in a guest house.

The DAP CA-2300 Amplifier can be wired in bridge mode. The amplifier will deliver 600 watts into a 4 ohm load or it could deliver 525 Watts into a 8 ohms. Depending on the impedance presented to the amplifier the speaker cabinet should be rated between 240 and 370 Watts at 8 ohms or 210 and 330 Watts at 4 ohms.


DAP CA-2300 Amplifier

Using the amplifier in bridge mode you can easily increase the power of a 100V line mixer amplifier.

Power Supply: 230Vac, 50Hz (IEC)
Output Power (RMS):

2 x 180W @ 8 ohms

2 x 300W @ 4 ohms

2 x 525W @ 2 ohms

1 x 600W @ 4 ohms (Bridged)

1 x 525W @ 8 ohms (Bridged)

Line input:

2 x XLR 20K (balanced)

2 x 6.35mm Jack (balanced)

Line Output:

None

Frequency Response:

20Hz - 20kHz

Signal to Noise Ratio (SNR):

> 98 dB

Total Harmonic Distortion (THD): <0.1%
Dimensions:

484x 281 x 44mm

Related Products