DAP CA-2150 Amplifier
DAP
446-510
8717748421418
    Delivery time:2 - 3 Working Days
Add to cart
  • Description
  • More
  • Specifications

2 x 90 Watt @ 8 ohms

Suitable for 2, 4 and 8 Ohm Operation.

Built in Limiter

Stereo or Bridge Mode.

2 x Balanced XLR Inputs.

Independent Channel Gain Controls.

LED Signal Indication.

The DAP CA-2150 is a 2 x 150 watt amplifier for a compact 19-inch installation with a 1 unit height. Equipped with Class D technology and SMPS, the CA-2150 has all the necessary functionalities for today's user.

This 2-channel model has XLR and Jack inputs. Available outputs are speakON and 6.3 mm Jack with the option to switch between stereo and bridge mode. In addition, the gain is adjustable per channel.

CA-2150 has a built in limiter which can be switched in or out depending on your sysems configuration.

The DAP CA-2150 Amplifier can be wired as 2-channel stereo unit with two compatible speakers. The amplifier can deliver 90 watts per channel into a 8 ohm load. So each speaker cabinet should be rated between 35 and 60 Watts at 8 ohms.

DAP CA-2150 Amplifier 

This set up would be suitable for small waiting room or reception area.

The DAP CA-2150 Amplifier can be wired as 2-channel stereo unit with four identical speakers. The amplifier can deliver 150 watts per channel into a 4 ohm load. So each speaker cabinet should be rated between 20 and 50 Watts at 8 ohms.

DAP CA-2150 Amplifier

You could use a system like this in a hotel foyer or reception desk.

The DAP CA-2150 Amplifier can be wired as 2-channel stereo unit with eight speakers. The amplifier can deliver 230 watts per channel into a 2 ohm load. So each speaker cabinet should be rated between 25 and 35 Watts at 8 ohms.

DAP CA-2150 Amplifier

Ideal system for dinning room in a guest house or bed and breakfast.

The DAP CA-2150 Amplifier can be wired in bridge mode. The amplifier will deliver 275 watts into a 4 ohm load or it could deliver 190 watts into a 8 ohms. Depending on the impedance presented to the amplifier the speaker cabinet should be rated between 80 and 120 Watts at 8 ohms or 110 and 170 Watts at 4 ohms.

DAP CA-2150 Amplifier

Using the amplifier in bridge mode you can easily increase the power of a 100V line mixer amplifier.

Power Supply: 230Vac, 50Hz (IEC)
Output Power (RMS):

2 x 90W @ 8 ohms

2 x 150W @ 4 ohms

2 x 230W @ 2 ohms

1 x 275W @ 4 ohms (Bridged)

1 x 190W @ 8 ohms (Bridged)
Line input:

2 x XLR 20K (balanced)

2 x 6.35mm Jack (balanced)
Line Output:

None
Frequency Response:

20Hz - 20kHz
Signal to Noise Ratio (SNR):

> 96 dB
Total Harmonic Distortion (THD): <0.1%
Dimensions:

4824x 281 x 44mm