Adastra LR2 Induction Loop Receiver
Adastra
443-855
5015972172186
    Delivery time:2 - 3 Working Days
Add to cart
  • Description
  • More
  • Specifications

LR2 Battery Operated Induction Loop Receiver.

3.5mm jack socket for headphone connection.
Volume control and lo-cut switch to adjust sound quality.
Can be used along with with an induction loop system to create an unobtrusive audio tour guide for art galleries, museums etc.
Supplied with in-ear headphones.

A compact, battery powered belt-clip receiver for testing and setting up induction loop systems.
LR1 INDUCTION LOOP RECEIVERLR1 Induction Loop Receiver
CONTROLS
1. Output level control
2. Power LED
3. LO CUT switch
4. 3.5mm headphones jack output
OPERATION
Slide front panel upwards to install 9V battery, then close the cover.
With the LEVEL control down, connect headphones to the 3.5mm output
jack to power up the receiver. The power LED will light up. Turn up the
LEVEL control and walk inside the induction loop field
(ensuring loop amp is on with signal connected).
Wherever the field is active, the receiver will pick up the signal, allowing
you to map out the loop coverage area.
Switch LO CUT on if there is excessive low frequency mains hum present.
Disconnect headphones to switch off power and preserve battery.
Remove battery if not used for long periods.
Power Supply: 9Vdc (PP3 battery included)
Controls: Volume and low-cut switch
Connection: 3.5mm headphone jack
Headphone Impedance: 32 Ohms
Dimensions (w x l x h): 60 x 117 x 32mm