Prototyping, PCB Design

!
Velleman
5410329375843
1-5 Days
333-000
Weight: kg

Velleman PCB Etch Tank ET20

The ET20 is a small in expensive tank for etching PCB's, included is a small heater, air pump and clips to support printed circuit board. Switch on, raise temperature up to 32ºC, place circuit board in tank and switch on air pump. The board should be ready in 4 minutes. Suitable for boards no larger than 345 x 225mm. Tank Capacity 2l.
Dimensions: 360 x 280 x 40mm (Ext)
350 x 230 x 30mm (Int)
Power Supply: 230Vac 300W
K & H
5410329219840
1-5 Days
336-031
Weight: kg

640 Tie Point Breadboard SD-10

Prototyping breadboard with a total of 640 contact points arranged in two groups of 64 rows of 5 interconnected sockets. All contacts are Silver plated nickel silver on a 0.1” pitch. Supplied with a self adhesive foam base.
Dimensions:

170 x 40 x 10mm

Velleman
5410329219857
1-5 Days
336-033
Weight: kg

840 Tie Point Breadboard VTBB2N

Prototyping breadboard with a total of 840 contact points arranged in two groups of 64 rows of 5 interconnected sockets & four power rails of 50 connected sockets. All contacts are Silver plated nickel silver on a 0.1” pitch. Supplied with a self adhesive foam base.
Dimensions: 170 x 40 x 10mm
K & H
5410329219864
1-5 Days
336-036
Weight: kg

1680 Tie Point Breadboard on Baseplate SD-24

Prototyping breadboard with a total of 1680 contact points arranged in four groups of 64 rows of 5 interconnected sockets & eight power rails of 50 interconnected sockets. Silver plated nickel silver contacts on a 0.1” pitch. Supplied mounted on a base plate with three 4mm binding posts.
Dimensions:

224 x 150 x 20mm

K & H
5410329219871
1-5 Days
336-037
Weight: kg

2420 Tie Point Breadboard on Baseplate SD-35

Prototyping breadboard with a total of 2420 contact points arranged in six groups of 64 rows of 5 interconnected sockets & ten power rails of 50 interconnected sockets. All contacts are Silver plated
nickel silver on a 0.1” pitch. Supplied mounted on a base plate with four 4mm binding posts.
Dimensions: 243 x 195 x 20mm
K & H
1-5 Days
336-039
Weight: kg

390 Tie Point Breadboard KH-102

Prototyping breadboard with a total of 390 contact points arranged in two groups of 29 rows of 5 interconnected sockets & four power rails of 25 interconnected sockets. All contacts are Silver plated nickel silver on a 0.1” pitch. Supplied with a self adhesive foam base, and can easily be interlocked with boards of the same type to make a larger working area.
Dimensions: 81 x 60 x 10mm
Velleman
5410329612658
1-5 Days
336-200

65 Piece HQ Jumper Wire Pack M-M WJW009

A set of 65 Jump Wires featuring Male Pins at either end of 22AWG flexible wire. The set consists of four different lengths of seven coloured wires. Suitable for use with breadboards and headers on Arduino boards.
Velleman
5410329220129
1-5 Days
336-210
Weight: kg

140 Piece Jumper Wire kit WJW70

A kit containing suitable interconnecting wires for use with solderless breadboards. The leads are colour coded with PVC insulation and have preformed ends ready for use. There are 14 different lengths supplied in a handy plastic reusable case.
Velleman
5410329612269
1-5 Days
336-215
Weight: kg

350 Piece Jumper Wire kit WJW350

A kit containing suitable interconnecting wires for use with solderless breadboards. The leads are colour coded with PVC insulation and have preformed ends ready for use. There are 14 different lengths supplied in a handy plastic reusable case.
Velleman
5410329588250
1-5 Days
336-345
Weight: kg

10 Piece HQ Jumper Wire Pack M-F WJW005

A Pack of 10 jump wires with female connector at one end and male at the other, ideal for use with pin headers. Each pack contains 10 x 150mm jump wires (Red, White, Blue, Green. Orange, Yellow, Purple, Brown, Grey and Black). Ideal for linking development boards like Arduino or Raspberry Pie to breadboards.